P-Series

OEM Insertion Reader

Magnetic Stripe Reader


Compact and robust for unattended outdoor payments, the P-Series conforms to ISO standards. The P-series is compliant while performing transactions in various outdoor applications including, self service kiosks, vending machines, petrol dispensing pumps and POS applications.


P-Series Versions


USB Configuration P/N
PermaSeal Insert Tracks 1, 2 Dual head Extended bezel Stripe up or down Bezel, Head Right 21022851NZ
RS232 Configuration P/N
Tracks 1, 2 Single head Head on left side 21029650NZ
Tracks 1, 2 Dual head, with JIS discrimination   21029550NZ

TTL Configuration P/N
Tracks 1, 2 Dual head Extended arm bezel 9 pin header Magnetic card present signal (0 = reading card) Rear sensor (0 = card inserted) 21021451NZ
Tracks 1, 2 Dual head Extended arm bezel 7 pin header   Rear sensor (1 = card inserted) 21021751NZ
 
Magtek featureslider

Sealed bezel and chassis

The water-tight design of the bezel and reader body meet UL50 requirements.
Magtek featureslider

Robust Design

Ideal for gas pumps and outdoor kiosk applications. Electronics are protected from harmful contamination and unit is sealed from vapors and liquids. Available with mounting brackets that tilt the reader, draining away fluid.
Magtek featureslider

Conforms to ISO Standards

ISO Compliant card reader with dual head configurations supporting 2 or 3 tracks of information.
Magtek featureslider

Multiple Interface Options

Available with USB, RS232 or TTL interface.
Next
Previous

Features

  • Sealed bezel and chassis
  • Ideal for gas pumps and outdoor kiosk applications
  • Multiple interfaces available
  • Mounting brackets optional
  • Dual head / Double-sided option
 
Show Specifications

P-Series - Specifications


+ USB Configuration


General

Interface USB, RS232, TTL, Shift-Out
Cable Optional 6 ft. (white or black) – only with the USB and RS232 interfaces
Reference Standards ISO 7810 & 7811, AAMVA
Card Speed 3 to 50 ips (7,6 to 127 cm) per second

Electrical

Power Input 5V from USB port
Current Normal mode: 30 mA
Suspend mode: 300 μA

Mechanical

Weight 3.74 oz. (106.03 g)
Dimensions See Appendix A in Technical Manual
Cable length Optional

Environmental

Temperature Operating: -40°F - 185°F (-40°C - 85°C)
Storage: -40°F - 185°F (-40°C - 85°C)
Humidity Operating: 10% - 90% non-condensing
Storage: 10% - 90% non-condensing
Altitude Operating: 0 - 10,000 ft (0 - 3,048 m)
Storage: 0 - 50,000 ft (0 - 15,240 m)

+ RS232 Configuration


General

Power Input From RS-232 interface
Card Speed 3 - 50 (7,62 - 127 cm) per second

Electrical

DTR Voltage (Input) +5 to +15 VDC
Transmit Data (TXD) +5 to -5 VDC
Receive Data (RXD) +15 to -15 VDC
Communication Transfer Rate: 9600 bps, 8 data bits, no parity, 1 stop bit
Current  
Power on Peak 10 to 12 mA
Transmitting 8 to 11 mA typical (5 ms duration)
Quiescent 4 to 6 mA typical (continuous)

Mechanical

Dimensions: Without Bezel With Extended Arm Bezel
Length: 4.08" (103.6 mm) 4.82" (122.4 mm)
Width: 3.15" (80.0 mm) 3.54" (90.0 mm)
Height: 1.29" (32.8 mm) 1.81" (46.0 mm)

Environmental

Temperature



Operating


Storage
Units shipped prior to November 1, 2003:
32 oF to 131 oF (0 oC to 55 oC)



Units shipped after November 1, 2003:
-4 oF to 158 oF (-20 oC to 70 oC)

-40 oF to 176 oF (-40 oC to 80 oC)
Humidity: Operating 10% to 90% non-condensing
Storage 10% to 90% non-condensing
Altitude Operating 0-10,000 ft. (0-3048 m.)
Storage 0-50,000 ft. (0-15240 m.)

+ TTL Configuration


General

Power Requirements 2 Track: +5 VDC ±10%, less than 12 mA
Speed Range/Second 3 - 50 (7,62 - 127 cm) per second

Electrical

Input Voltage +5 VDC ±10%.
Current Draw: Less than 12 mA
MTBF: Electronics: 125,000 hours.
Head: 1,000,000 passes
(500,000 insert cycles)
Output Signal Levels Vol = 0.4 V @ 2.0 mA
Voh = Vcc – 0.5V @ 2.0 mA
Interface: TTL level.
Dielectric Strength: DC250 volts, 1 minute
Insulation Resistance: Greater than 10 M ohms at DC 250V
(Measured between PCB ground and frame).

Mechanical

Without Bezel With Extended Arm Bezel  
Length: 4.08" (103.6 mm) 4.82" (122.4 mm)
Width: 3.15" (80.0 mm) 3.54" (90.0 mm)
Height: 1.29" (32.8 mm) 1.81" (46.0 mm)
Weight: 3.5 oz. (100 g ±20%)

Environmental

Temperature Operating: -22 oF to 140 oF (-30 oC to 60 oC)
Storage: -22 oF to 158 oF (-30 oC to 70 oC)
Humidity: Operating: 10% to 90% non-condensing
Storage: 10% to 90% non-condensing
Altitude Operating: 0 - 10,000 ft. (3,048m)
Storage: 0 - 50,000 ft. (15,240m)